PaloSanto Solutions
Fanvil C60 and Elastix Server Setup Guide
5
Note:
If you want to add an IAX2 extension you have to select “Generic IAX2
Device” from Figure 4-3. Add the same information as SIP extension, submit and
apply changes. Then click on the created IAX2 extension and set
requirecalltoken
to
no.
9.
With this you have just finished creating a SIP extension that will be used by the
Fanvil C60 to register with the Elastix Server. Repeat Steps 5 through 8 to similarly
create another extension (different values on Step 6) to be used by the IP (SIP)
Phone to register as well (extension 302 in this example). Once finished you will
see something similar to Figure 4-6
Figure 4-6. Fanvil and IP Phone extensions successfully created
10.
To register the Fanvil Phone, you will need to enter the information from the
extension created on the Elastix Server into the Fanvil Phone by logging into the
Fanvil C60 WebUI.
To register the Fanvil Phone we have two methods:
Manual Configuration
and
AutoProvisioning using Elastix’s Endpoint Configurator (This phone supports this
feature in Elastix 2.4 or higher).
