2.2. Initial Setting
This VoIP Phone provides you with rich function and parameters setting. If you have enough knowledge
about network and SIP protocol, it is better for you to understand many parameters. But if you know little
about network and SIP protocol, you can also easily make initial setting according to the following steps to
enjoy rapidly high quality voice and low cost from this VoIP Phone.
Before make initial setting, please check if your corporate IP telephony network can work normally, and you
have finished “connect the phone”.
This VoIP Phone Supports DHCP by default. It will receive an IP address and other network-related settings
(Netmask, IP gateway, DNS server) from the DHCP server. If your network supports DHCP, you can connect
this VoIP Phone directly to the network. If your network doesn’t support DHCP, you need change this VoIP
Phone’s network connection setting. According to the following steps, change this VoIP Phone’s DHCP
network connection setting into PPPoE or static IP which your network supports at present.
2.2.1. PPPoE mode.
1.
Press the 3 key for three seconds, and then confirm it by the Enter key, your phone network connection
mode will switch into PPPoE mode. Prepare your PPPoE account name and password.
2. Press the OK key, the LCD screen will display “INPUT PASSWORD”.
3. Input the password (default value is 123), and press the ENTER key, the LCD screen will display
“NETWORK”.
4. Press the
key and LCD screen will display “WAN”, press the
key, enter it by
the
key, the LCD screen will display “STATIC NET”. Then press the
key again, enter it
by the
key, the LCD screen will display “USER NAME”.
5. Press the
key and then press the
key (the left is also empowered delete function), input
your PPPOE account number then press the
key to confirm. The LCD screen will display the
inputted PPPOE account number.
6. Press the
key to return to the previous menu, and then press the
key, the LCD screen
will display “PASSWORD”. Then press the ENTER key, and the
key, input your PPPoE’s password and
confirm it by the
Key, the LCD screen will display the password which you inputted.
7. Press the EXIT key for four times and press the DOWN key, till the LCD screen display “SYSTEM”.
8. Press the ENTER key, the screen display “SAVE”, then press the
key again, the LCD screen
will display “ARE YOU SURE”.
9. Press the
key, the phone will save your setting and the LCD screen will display “SAVING
NOW”, then return to display “SAVE”.
