TROUBLESHOOTING
If there is a problem with the vacuum cleaner, carry out the following checks
to find the cause. If the problem still persists after the checks have been made,
do not use the vacuum cleaner to prevent the possibility of an accident occurring.
Turn the ON/OFF switch to the "OFF" position, disconnect the power cord from the
wall outlet, and contact FANTOM Customer Service at 1-800-
275-9251
.
Problem Cause R
emedy
The motor does not operate
when the ON/OFF switch is
set to the "ON" position.
Suction force is weak.
The agitator does not
operate.
The power cord plug is not
securely inserted into the
wall outlet.
The flat belt is worn or
broken.
Insert the power cord plug
securely into the wall
outlet.(refer to page 5 )
Replace the flat belt.
(refer to page 13 )
16
The dust compartment is full.
The suction hose is blocked.
The filters are dirty.
The nozzle head is blocked.
Empty the dust compartment.
(refer to page 9)
Remove the blockage.
(refer to page 11)
Clean the filters.
(refer to page 10)
Remove the blockage.
(refer to page 11)
The nozzle air inlet pipe is
blocked.
Remove the blockage.
(refer to page 11)
TO ORDER REPLACEMENT FILTERS CALL 1-800-
275-9251
E
9BF-D-P111-00404 0208-