Fantom Professional PROMIDI 200P, Manual

Page: 11 / 22

11
MAINTENANCE AND CLEANING
ASSEMBLY FOR WET VACUUMING FUNCTION
EN
• Plug the attached tubes to the hose handle. Instead
of using two extension tubes, you can use your
machine with only one tube or without any extension
tube by connecting accessories directly to the hose
handle.
• Operate your machine by using ON-OFF switch.
• When the fluids have reached the highest permitted
level in the tank, buoy automatically blocks the
suction and the motor gets noisier. In this case, switch
off the machine immediately, pull the plug and
remove the motor bonnet from the tank. Empty the
tank and then restart your machine.
• If the place is so deep for wet vacuuming function,
do not dip all of the accessory so as not to block air
circulation. If the liquid is on a smooth area, use wet
vacuuming function with your suitable accessory by
moving forward and back.
• Before starting maintenance and cleaning, turn off
the machine and unplug your machine’s cable from
the power socket.
• Empty the tank after each fuction. (dirt,dust and liquid).
NOTE: To prevent bad odors, don’t leave any liquid in the
tank. Clean and keep empty the tank after each operation.
• After wet vacuuming function, dry tubes, hose and
parts of the motor properly. After filling out and
drying the tank, operate the machine for a few minutes
in order to prevent bad odors.
• Do not wash the motor bonnet and do not put it in
water. Only clean it by mopping.
• Clean the tank by mopping or washing.
• Clean the accessories by mopping or washing.
• Clean cloth filter bag by shaking off. Do not wash or
put it in water.
• Change paper dustbag with a new one after getting
full.
NOTE: Always keep a reserve of paper dustbag to use
machine when needed.