Fantom Professional PROMIDI 200P, Manual

Page: 10 / 22

10
ASSEMBLY FOR WET VACUUMING FUNCTION
ASSEMBLY FOR DRY VACUUMING FUNCTION
EN
• Unlock the locking latches pulling outwards to the
right and left.
• Put the motor bonnet away through holding it from
carrying handle.
• Insert the paper dustbag and cloth filter bag in the
tank.
• Make sure that paper dustbag and cloth filter bag are
plugged in dry vacuuming function.
• Put the motor bonnet back on the tank and lock the
latches.
• Plug the attached tubes to the hose handle. Instead
of using two extension tubes, you can use your
machine with only one tube or without any extension
tube by connecting accessories directly to the hose
handle.
• Insert the hose by pushing it into the suction mouth.
• Plug-in your machine’s cable to the power socket.
• Operate your machine by using ON-OFF switch.
• By moving forward and back your suitable accessory
for the surface you want to clean, make dry vacuuming
function.
• Unlock the locking latches pulling outwards to the
right and left.
• Put the motor bonnet away through holding it from
carrying handle.
• Take the paper dustbag and cloth filter bag out of
the tank.
• The tank should be clean and empty before wet
vacuuming function.
• Do not put water into your tank for wet vacuuming
function.
• Put the motor bonnet back on the tank and lock the
latches by pushing right and left.
• Insert the hose by pushing it into the suction mouth.
• Plug-in your machine’s cable to the power socket.