15
Preset parameter reset
To resume the preset temperature pro
fi
les and
values (T1-T2-T3-Temperature used with the
Manual mode, Temperature used with the Jolly
mode, Antifreeze temperature, OFF function),
keep the
▲
and
▼
buttons depressed simulta-
neously when you are in the temperature pro-
fi
le programming mode.
Displaying the temperature detected by
the separate probe
To display the temperature detected by the
separate probe (only if the latter has been con-
fi
gured as an external probe or
fl
oor-mounted
probe), the chronothermostat must be con
fi
g-
ured (refer to <<chronothermostat con
fi
gura-
tion>>) and the probe must be connected.
To display the temperature value read by the
separate probe, press the button of the operat-
ing mode currently used (the temperature will
blink).
To display again the temperature detected by
the chronothermostat, press again the button
of the operating mode currently used (the tem-
perature will not blink any longer).
Statistical data
The CH150 chronothermostat provides a set of
statistical data concerning the system opera-
tion. To access this data, proceed as follows:
1.Enter the programming menu main page.
The operating mode currently used will be
interrupted temporarily. Choose the statistical
data function.
2. Page 1: number of
hours during which the
system was operated
on the previous day (6
hours in the image).
Use the
►
button to go
to the next page.
