8
Fastening the socket
The thermostat is supplied complete with a
socket suitable for mounting both on the wall
and to rectangular or round built-in 3-seat
boxes (503).
Remove the thermostat top cover.
Separate the thermostat socket and front by
removing the screw by means of a suitable tool
and taking the front part off.
Fasten the socket to the desired surface by
means of the special fastening holes; make
sure that the socket is properly engaged, with
no deformation, and that the connecting multi-
DRILLING CENTERS
SCREWS
SOCKET
FASTENING
HOLES
MULTI-POLE
CONNECTOR
pole connector is located in the right bottom
corner.
To ensure correct operation, the socket shall
be placed at a height of approximately 1.5 me-
tres from the
fl
oor, far from heat sources (direct
sunlight, etc.) and doors/windows.
Electric connections
Lower the terminal protection door prior to
making the connections.
60.0
83
