10
Fastening the thermostat onto the socket
Insert and screw the thermostat down to the
socket (make sure that the multi-pole connec-
tor is engaged correctly). Fit the battery top
cover back into place.
Thermostat con
fi
guration
The thermostat con
fi
guration allows you to
customize the device operation parameters.
To access the con
fi
guration program, proceed
as follows:
1. Press the “Reset” button and also button 3
(with the thermostat ON).
2. Release the “Reset” button, then keep but-
ton “3” depressed for at least 3 seconds.
3. Release button “3”.
Warning! The con
fi
guration shall be performed
only by quali
fi
ed personnel.
The con
fi
guration parameters are represented
by an index (P01, P02…) on the display and
by pressing buttons “1” and “2”, the parameter
indexes will be scrolled through. Press button
“3” to enter the displayed parameter.
To modify the current parameter, press buttons
“1” and “2”. To exit the parameter, press button
“3”. Once all parameters have been set, press
button “1” until the “END” message appears,
then press button “3”. Now the thermostat will
save the modi
fi
ed parameters and will auto-
matically exit the parameter menu.
N.B. The thermostat will send the switch-on/-off
controls for the three fans and the two valves
to the actuator to a
fi
xed rate of 1 minute.
