background image

49

EN

G

LIS

H

BASIC SAFETY RULES

BEHAVIOUR AND DRIVING

This handbook should be read and understood 

before using the vehicle.

To use this vehicle it is necessary to have fulfilled

all the requirements of law (driving licence, mini-

mum age, insurance, government taxes, registra-

tion,  number  plate,  etc.).  The  taking  of  certain

medicines,  alcohol  and  narcotics  or  a  state  of

physical fatigue and somnolence may consider-

ably increase the risk of accidents as they affect

the body.

If  the  rider  is  inexperienced,  it  is  advisable  to

become familiar with the vehicle on sections of

road with little traffic. 

NEVER lend the vehicle to

inexperienced  persons  and  in  any  case  ensure

that the person has the necessary qualifications

for riding the vehicle.

The  Highway  Code  must  be  meticulously  ob-

served when riding the vehicle.

It is absolutely forbidden to race with the vehicles

outside special authorised circuits supervised by

appointed personnel. Avoid riding off road. 

Always ride correctly, avoiding manoeuvres that

are abrupt or dangerous for yourself and others

(e.g.: weeling , remaining in the slipstream of the

vehicles  in  front,  failing  to  comply  with  speed

limits, etc.).

Assess  and  always  take  into  due  consideration

road conditions, visibility, etc.

Always keep both hands on the handlebars in or-

der to steer properly and always keep both feet

on the relative footrests.

Under no circumstances is it allowed to stand up

or to stretch out limbs while riding.

While riding it is a good rule to pay the utmost

attention, avoiding being distracted or influenced

by  persons,  things,  actions  (e.g.  do  not  smoke,

eat, drink, read, etc.).

The  vehicle  should  always  be  kept  in  perfect

condition, checking that the fuel, brake fluid and

coolant are always within the recommended lev-

els.

Only use specific lubricants and fuels of the type

indicated in the relative tables for the vehicle in

question.

After a fall, check all the controls, levers, pipes,

cables,  braking  systems,  wheels  and  tyres  for

damage.

If any damage is found, do not ride the vehicle,

but have it suitably transported (complying with

safety  and  legal  regulations)  to  a FANTIC MO-

TOR authorised dealer.

  It  is  forbidden  to  change  in  any  way

whatsoever the position, angle or colour

of: number plate, turn indicators, lighting

devices and horns. Do not make techni-

cal changes to increase performance or

to alter the original characteristics of the

vehicle in any way.

Such  changes  lead  to  cancellation  of  the  war-

ranty and may jeopardise the performance and

therefore decrease the level of safety of the ve-

hicle or even make it illegal and subject to penal

sanctions.

Compliance  with  all  legal  provisions  as  well  as 

national and local regulations regarding vehicle 

equipment is recommended at all times.

CLOTHING           

Before starting the vehicle, always put a helmet 

on and fasten it correctly.

The helmet must be:

- approved;

- intact;

- the correct size;

- with intact and clean visor.

Wear  close-fitting  protective  clothing  without

dangling  accessories  (e.g.  ties,  belts,  cords,

scarves, etc.), which could be entrapped and cre-

ate problems in steering the vehicle.

Preferably light coloured or reflecting clothing is

recommended  in  order  to  be  more  visible  and

be better protected in the event of a fall.

If sharp pointed objects are worn they could be

dangerous in a fall, for example:

- keys;

- pens;

- glass containers, etc.

All  these  recommendations  are  also  applicable

for the passenger.

Summary of Contents for Fantic 50 Enduro























































Reviews: