15
4. Features
4.1 High speed external storage solution, USB 3.0(5.0 Gb/s)
The FANTEC MR-35VU3R provides the following Serial Advanced Technology
Attachment (SATA) features:
Automatic negotiation between SATA I (1.5Gbps) and SATA II (3.0 Gbps)
Serial ATA 2.5 specification compliance (Gen2m)
Serial ATA Port Multiplier 1.1 specification compliance
For detailed information about SATA technology, refer to the following specifications
online:
Serial ATA: High Speed Serialized AT Attachment, Revision 1.0a
Serial ATA II: Extensions to Serial ATA 1.0a, Revision 1.1
Serial ATA II: Port Multiplier, Revision 1.1
The Serial ATA web site is
USB Features
The FANTEC MR-35VU3R provides the following Universal Serial Bus (USB)
features:
USB 1.0 and USB 2.0 specification compliance
For detailed information about USB technology, refer to the following specifications
online:
Universal Serial Bus Specification, Revision 1.1
Universal Serial Bus Specification, Revision 2.0
The USB Organization web site is http://www.usb.org/
4.2 Serial ATA HDD
Populated with two Serial ATA (SATA) hard disk drives (HDDs), each unit can
manage as much as 6,000 gigabytes (i.e., 6 terabytes) of data, depending on the
capacity of the hard disk drives that are installed. By combining multiple units in a
daisy-chained hierarchy structure, you can increase the total storage capacity of your
system.
4.3. 4 Working Modes (BIG,JBOD,RAID0,RAID1)
You can configure the FANTEC MR-35VU3R to use any of the following Storage
Policies to map the appliance's physical hard drives to virtual drives that are visible to
the host computer. The virtual drives are called volumes in the GUI. The host
operating system treats each volume as if it were a single physical drive.
This virtualization allows you to overcome restrictions that are imposed by physical
hard drives, such as speed, storage capacity or data storage reliability
