Fantec MM-HDRL, User Manual

Page: 133 / 214

EN 133 / 214
AUDIO PERFORMANCE
DA Converter 24-bit/192kHZ
AD Converter 24-bit/96kHZ
Signal-Noise (1kHZ) ≥ 95dB
Dynamic Range ≥ 90dB
(1kHZ)
Channel
≥ 95dB
Separation
Total Harmonic
Distortion (1kHZ)
≤ -85dB
GENERAL
Power Supply
Power
Consumption
Operating
Temperature
Operating Humidity
AC 100~240V 50~60Hz
Approx. 35 W
+5°C to +35°C (+36°F to +95°F)
5% to 80% RH
Hard Disk
Dimensions
(W/H/D)
Net Weight 3.5’’ SATA HDD
61x198x171mm
Approx 1.5 kg
Note : The specifications and design of this product are subject to change without notice.
13.2 Frequently Asked Questions
Question 1. My computer does not recognize my player.
Answer:
(1) Make sure the player is powered on. If it is off, the computer will not be able to find the
player;
(2) Make sure the player is connected to computer. (Refer to 1.4.1 for connecting player to
computer);
(3) When using Windows 98SE, install the USB driver first. After installation, restart the
computer. Then reconnect the player to the computer. (Refer to 1.4.1 for connecting player to
computer);
(4) If you installed the Windows 98SE driver over your Windows® XP, 2000, or ME edition,
problems might occur;
(5) It is not recommend using the USB ports in the front of your computer, try to use the USB
ports in the rear, because the USB ports in the front are often from non-powered hubs.
Question 2. When I try to disconnect the USB device, I keep on getting “The device