Step 5
Page 8
Step 6
You will need
Phillips head
screwdriver
(P4)
(P5)
You will need
fantasticfurniture.com.au
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
(P4)
(P1)
(P2)
(P5)
(P5)
(H3)
(H1)
(H2)
(H3)
(H1)
(H2)
Ensure the raw edges of the
shelves are facing towards
the back of the unit”
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
Ensure Cam Nuts
are facing
underneath the
cabinet like shown.
(H1)
(H1)
Phillips head
screwdriver
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
(H2)
(H2)
Attach Support Panel (P5) to Bottom Panel (P4) by tightening 2 x Cam Nuts (H1) with the
Attach Bottom Panel (P4) and Support Panels (P5x2) to Left & Right Side Panels (P1&P2)
and secure by tightening all 8 x Cam Nuts (H1) with the Phillips Head Screwdriver.
Phillips Head Screwdriver.
