Page 19
fantasticfurniture.com.au
Step 27
Step 28
You will need
Phill
i
ps
H
ead
Screwdriver
You will need
Phill
i
ps
H
ead
Screwdriver
(H2)
P25
(H2)
(H2)
15 x Cam Bolts
(H2)
(H2)
15 x Cam Nuts
(H1)
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
(H1)
(H1)
P27
P30
P26
P25
(H1)
(H1)
(H2)
(H2)
x 3
x 3
Insert 5 x Cam Nuts into the Drawer Side Panels (P26 & P27) and Drawer Support Panel (P30).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach the Drawer Front Panels (P25) to the Drawer Side Panels (P26 & P27), and Drawer
Support Panels (P30),
by tightening Cam Nuts with the Phillips Head Screwdriver.
Repeat for the remaining drawers.
Insert 5 x Cam Bolts (H2) into the Drawer Front Panel (P25), tightening with the
Phillips Head Screwdriver.
Repeat for the remaining drawers.
