Page 17
fantasticfurniture.com.au
Step 23
Step 24
You will need
Phill
i
ps
H
ead
Screwdriver
You will need
Phill
i
ps
H
ead
Screwdriver
(H2)
8 x Cam Bolts
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
P22
P23
P20
(H5)
8 x Small Dowels
(H2)
(H2)
P17
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
P21
P21
Insert 8 x Small Dowels (H5) into Panels (P21, P22, & P23).
Attach Panels (P21, P22, & P23) to Side Panel (P
19
) by aligning the holes and tightening
the cam nuts with a Phillips Head Screwdriver.
Repeat process to attach (P21, P22 & P23) to Side Panel (P
20
).
Insert 8 x Cam Bolts (H2) into the Top Panel (P17), by tightening with a Phillips Head
Screwdriver.
This side has raw edge
This side has raw edge
P23
P
19
(H1)
(H
5)
This side has raw edge
