Step 7
PAGE 8
Step 8
Allen Key
(H12)
12
x Bolt
(H16)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
You will need
Flat head
screwdriver
4
x Big Cam
Nut (H2)
You will need
(P2)
Position Left Side Panel (P3) onto Bottom Panel (P2) &
Front Rail (P5) & Back Rail (P6).
If necessary, adjust the panels to allow Upper Back Panel
(P12) & Lower Back Panel (P13) to fit into the groove of
Left Side Panel (P3)
Insert 4 x Big Cam Nuts (H2) into Panels (P2) & (P5) & (P6)
and turn clockwise to lock.
Fix each Metal Leg (P15) to Bottom Panel (P2) with 3 x Bolts (H16)
using Allen Key (H12).
(P15)
(P15)
(P15)
(P15)
