Step 11
PAGE 10
Step 12
6
x Plastic
Fixture (H15)
6
x Screw
(H14)
Phillips head
screwdriver
You will need
You will need
Phillips head
screwdriver
(P12)
(P1)
(P13)
(P3)
(P1)
We strongly advise that
you use the wall safety Bracket
provided to prevent the unit
toppling.
Seek advice from a qualified
trades person on how to
attach this safety Bracket to
your specific wall.
Move the Tallboy to the final position.
Mark fixing hole on wall and remove Tallboy.
Follow the instructions provided for the wall fittings to
mount the fittings to the wall.
Reposition Tallboy and fix the safety Wall Bracket (H13) to the wall.
Make sure it is firmly attached.
Fully tighten the screw (H7) on the Wall Bracket (H13) to the
Top Panel (P1).
Screw and Wall Plug are not provided.
Please use appropriate fixtures for your
wall.
XX
YY
H13
(P12)
(P1)
XX = YY
(P12)
If necessary, gently adjust the Top Panel (P1) sideway in either direction until XX and YY are equal.
Fix the Back Panel Connectors (H15) with Screws (H14) as shown.
H7
H7
