(P2)
(P10)
(P10)
(P9)
(P9)
H1
H4
H4
H4
H4
H1
Insert 4 x Cam Nuts (H4) into Side Panels (P5).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Side Panels (P5) to Legs (P9, P10),
then tighten the cam nuts using a Phillips Head Screwdriver.
Insert 4 x Dowels (H1) into Bottom Panel (P2).
Insert 2 x Cam Nuts (H4) into the holes of Bottom Panel (P2) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Legs (P9, P10) to Bottom Panel (P2),
then tighten the cam nuts using a Phillips Head Screwdriver.
Back panel slot
(P5)
(P5)
You will need
Step 4
2 x Cam Nuts
(H4)
4 x Dowels
(H1)
4 x Cam Nuts
(H4)
You will need
Step 5
H4
H4
Page 6
fantasticfurniture.com.au
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Phillips Head
Screwdriver