(P10)
(P3)
(P3)
(P6)
(P4)
(P9)
(P8)
(P7)
H3
H4
H4
H4
H2
H2
H3
H3
H3
H3
H3
H3
H3
H3
H3
(P1)
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
Attach 10 x Cam Bolts (H3) into Top Panel (P1).
Attach 8 x Cam Bolts (H3) into Legs (P7,P8,P9,P10).
Tighten Cam Bolts using a Phillips Head Screwdriver
Insert 4 x Small Dowels (H2) and 4 x Cam Nuts (H4) into Shelf Panel (P6) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Dividers (P3, P4) to Shelf Panel (P6),
then tighten the cam nuts using a Phillips Head Screwdriver.
Attach 2 x Cam Bolts (H3) into Dividers (P3) using a Phillips Head Screwdriver.
Repeat Step 2 for Right Divider (P4).
18 x Cam Bolts
(H3)
You will need
Step 1
Phillips Head
Screwdriver
4 x Cam Bolts
(H3)
You will need
Step 2
Phillips Head
Screwdriver
Phillips Head
Screwdriver
4 x Small
Dowels (H2)
You will need
Step 3
4 x Cam Nuts
(H4)
Make sure raw edge
is facing up.
Page 5
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.