fantastic furniture Buzz Student Desk, Manual

Page: 7 / 32

Page 7
Step 5
You will need
Step 6
Fix the Side Panel R (P2) to unit by aligning dowels to matching holes and slot in.
Fasten using 5 x Screws (H2) using a phillips head screwdriver. Gently tap 4 x Leg Studs (H5)
to the underside of the Side Panels (P1 & P2) with a soft headed mallet as shown.
(P1)
(P3)
(P1)
(P6)
(P5)
(H4)
(H4)
(P2)
(P6)
(P2)
(H2)
(P5)
TOP
DETAIL A
DETAIL A
DETAIL A
Insert 4 x Cam Nuts (H4) into holes of Side Panels (P1 & P2). Rotate the Cam Nuts
(H4) so the arrows point towards the incoming Cam Bolts (H3). Align the Cam
Bolts (H3) and holes on the Top Panel (P3) to the holes and dowels on panels
(P1 & P2) and slot the panel on top. Tighten the Cam Nuts (H4) with a flat blade
screwdriver, rotating clockwise to lock into position.
Gently push Top Panel
(P3) downwards and turn
Cam Nut (H4) until tight.
Repeat with all Cam Nuts.
Push Cam Nut (H4)
into hole with arrow
pointing towards
Cam Bolt (H3)
Turn to lock
Flat Blade
Screwdriver
4 x Cam Nuts
(H4)
fantasticfurniture.com.au
4 x Leg Studs
(H5)
Phillips Head
Screwdriver
5 x Screws
(H2)
This is how a Cam Nut works...
The head of the bolt goes into the wide mouth of the nut.
You then turn the nut so it tightens over the bolt.
You will need
Soft Headed
Mallet
(H5)
DETAIL A