IMPORTANT SAFEGUARDS
When using an electrical appliance, basic safety precautions should always be observed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING
WARNING: To reduce the risk of fire, electrical shock, or injury to person:
1. The product is for household use only.
2. Connect the appliance to single-phase AC supply of the voltage specified on the rating
plate.
3. Never leave the fan unattended while it is in use. Always turn the product to the OFF
position and unplug it from the electrical outlet when not in use.
4. Extreme caution is necessary when any fan is used by or near children, invalids or
elderly person and whenever the fan is left operating and unattended.
5. Do not run cord under carpeting and do not cover cord with throw rugs, runners or
the like. Arrange cord away from traffic area and where it will not be tripped over.
6. Do not operate the fan with a damaged cord or plug, or after the fan malfunctions,
has been dropped, or damaged in any manner.
7. If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person to avoid a hazard.
8. Use the fan in a well-ventilated area. While using, distance of no less than 20cm
should be kept away from wall or corner to ensure the air intakes or exhaust openings
should not be blocked unexpectedly. The fan must not be located immediately below or
besides a curtain or the likes.
9. Do not insert or allow fingers or any other objects into grill to avoid a mechanical
danger when in use. Do not block air intakes or exhaust openings in any manner.
10. Use the fan on flat, dry floor only.
11. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
12. Children should be supervised to ensure that they do not play with the appliance.
13 .This product employs overload protection (fuse). A blown fuse indicates an overload
or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace
the fuse as per the user servicing instructions (follow product marking for proper fuse
rating) and check the product. If the replacement fuse blows, a short-circuit may be
present and the product should be discarded or returned to an authorized service facility
for examination and/or repair.
14. This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
15. When replacement of Plug, the safety Device
（
Fuse
）
is to be reinstalled or remounted
