Fantasia Medina, Owner'S Instruction Manual, Page: 7 / 18

7 of 20
The fan now requires to be connected to your household supply in accordance with diagrams
1-7.
Please note:
Before installation ensure that you have all pole disconnection of the electricity supply and that all wiring is
carried out in accordance with I.E.E. Regulations, current good practice, national and local electrical codes.
Improper installation may result in an electrical short and may void your warranty.
IMPORTANT: THIS
APPLIANCE MUST BE EARTHED.
Ways of wiring your fan
3. Wiring Instructions
Once the drop rod assembly has been
fitted, lift the fan up to the hanger bracket.
Steer the ball in from the side of the
bracket and lower it into the recess of the
bracket.
Rotate the ball around until the groove in
the side of the ball aligns with the
protrusion on the upper edge of the recess.
When aligned the fan should drop slightly
as it assumes it’s correct position. This is
to prevent rotation of the rod and fan
when the unit is working.
Connect the wiring as shown in the wiring
instructions. See pages 6~9.