Fanstel BlueFan BT680E, Manual

Page: 1 / 30

BlueFan BT680F/E/T BLE5 Module
1
Features

Standalone or used with a host MCU by UART interface/HCI Commands

Hybrid Castellated/LGA pins, easier prototyping, easier production

Toshiba SOC, built-in Cortex M0 processor

Masked-ROM:
▪
Boot program
▪
HCI/Extended HCI command
▪
Control API for GATT/SM layer
▪
API for hardware control

RAM: retention, 144 KB (user area RAM, 76 KB).

Flash:128 KB

Bluetooth RF analog core, baseband digital core and integrated antenna

Transmitter power +8 dBm;

Receiver sensitivity at 1Mbps: -95 dBm.

Receiver sensitivity at 125 Kbps: -105 dBm.

Bluetooth Low Energy (BLE) V5 GATT profile with OTA (Over The Air) support.

Bluetooth SIG certified BLE 5 stacks embedded in mask-ROM.

Up to18 General Purpose IOs to be configured by firmware:
▪
SPI interface,
▪
I 2 C interface
▪
UART interface, 9600bps to 921.6 Kbps
▪
Up to 2 wake up interfaces
▪
Up to 5 ADC channels (1 for internal monitoring of VDD).
▪
Up to 4 PWM channels

On board 32 MHz main clock

External 32.768 kHz sleep clock

Operation voltage: 1.9V-3.6V

Peak current consumption, 11.5 mA (+8 dBm TX, 2 Mbps PHY)

Deep sleep mode, <0.1uA

Operation Temperature: -40 o C to +85 o C

Sizes: 15x20.8x1.9mm;

Hybrid pins: 16 castellated and 24 LGA pins

Integrated shield to resist EMI
Applications:

Access Points

Industrial Control

Medical

Scanners

iOS and Android devices

Wireless sensors

Cable replacement

Instrumentation

Automobile

Sports

Proximity
Ordering Information:
module BT680F BT680T BT680E
SoC TC35680FSG-002 TC35681FSG-002 TC35680FSG-002