Fanset Fantom Professional PROMAX 800CM2 Manual Download Page 11

Page: 11 / 28

• Unlock the locking latches pulling outwards to the right and left.

• Put the motor bonnet away through holding it from carrying handle.

• The tank should be clean and empty for carpet shampoo function.

Note: Do not put water into your tank for carpet shampoo function.

• Put the motor bonnet back on the tank and lock the latches by pushing

right and left.

• Insert the hose by pushing it into the suction mouth. By pushing the

metal thin water hose to the by-pass adaptor.

• Connect elbow tube with spray trigger to the extension tubes by

pressing in, and extension tubes to each other. (You can operate your

machine without any tubes, too.) Then attach the carpet shampoo nozzle

to the extension tubes.

• Choose your suitable nozzle for the surface you want to clean. Plug the

jack on the nozzle by pushing to the trigger adaptor.

• Fill the shampoo tank with water and add 2-3 scale of shampoo

(non-foaming) in it. Insert the pin of the shampoo drawing pipe to its

connection place on machine by simply pressing.

Note: Always use the original and non-foaming carpet cleaning

shampoo. Otherwise this will damage the pump.

• In carpet cleaning function; connect elbow tube with spray trigger to the

extension tubes by pressing in, and extension tubes to each other. Then

attach the carpet shampoo nozzle to the extension tubes.

• Upholstery Cleaning function; insert the upholstery shampoo nozzle

directly to elbow tube with spray trigger. Insert the tip end of the

upholstery shampoo nozzle into the juction on the elbow tube with

spray trigger.

• Plug-in your machine’s cable to the power socket.

• Turn on the on-off switch to operate the device.

• Turn on the switch for shampoo delivery pump.

• Pull the trigger to spray the shampoo water on the floors you want clean.

Then stop pulling the trigger after spraying enough water. This will end

water spraying.

• When the dirty water has reached the highest permitted level in the

tank, buoy automatically blocks the suction. You should empty the dirty

water out of the tank.

• Certainly turn off the pump switch when water with shampoo is finished.

• Turn off the pump switch when it is not needed.

ASSEMBLY FOR CARPET SHAMPOO FUNCTION

•  Unlock the locking latches pulling outwards to the right and left.
•  Put the motor bonnet away through holding it from carrying handle.
•  The tank should be clean and empty when using wet vacuuming

function.

Note: Do not put water into your tank for wet vacuuming function.

•  Put the motor bonnet back on the tank and lock the latches by pushing
  right and left.
•  Insert the hose by pushing it into the suction mouth.
•  Plug the attached tubes to the hose handle. Instead of using two

Note: Turn off the pump switch for wet vacuuming function.

•  When the fluid has reached the highest permitted level in the tank, buoy
  automatically blocks the suction and the motor gets noisier. In this case,
  switch off the machine immediately, pull the plug and remove the motor
  bonnet from the tank. Empty the tank and then restart your machine.
•  If the place is so deep for wet vacuuming function, do not dip all of the
  accessory so as not to block air circulation. If the liquid is on a smooth
  area, use wet vacuuming function with your suitable accessory by
  moving forward and back.

•  Unlock the locking latches pulling outwards to the right and left.
•  Put the motor bonnet away through holding it from carrying handle.
•  Insert the dust bags ın the tank
•  Make sure that dustbags are plugged in dry vacuuming function.
•  Put the motor bonnet back on the tank and lock the latches.
•  Insert the hose by pushing it into the suction mouth.
•  Plug the attached tubes to the hose handle. Instead of using two

  extension tubes, you can use your machine with only one tube or without
  any extension tube by connecting accessories directly to the hose
handle.
•  Plug-in your machine’s cable to the power socket.
•  Operate your machine by using ON-OFF switch.
•  By moving forward and back your suitable accessory for the surface you
  want to clean, make dry vacuuming function.