DNA
TM
System Instruction Manual
D00981262
Revision A, May 2015
27
4.8.2 HT4700 Configuration
•
Click the
+
symbol to enter the name. The example below shows
hpht
in
Machine ID
field.
•
For the
Mode
l, select
HT4700
from the dropdown.
•
Click the
Config
gear to open the next window. Enter the
Address
and
Comm
Port
(communications port).The filter press has two temperature controllers
and requires two addresses. The address for the temp controller labeled “Heater
Temp” on the HT4700 should be entered into the field labeled “Heat
Controller” in the DNA
TM
software. The address for the temp controller labeled
“Cell Temp” should be entered into the field labeled “Heat Display” in the
software.
•
Press
OK
.
•
This table will appear. No changes are required. To close this screen, click the
X
(top right corner).
