Fanmaster NFPD75, Instruction Manual

Page: 10 / 16

1. Place the fan on an even surface.
2. Connect the plug to the relevant power source.
3. The fan is not suitable in environments that is too moist or corrosive.
4. The fan has 3 speeds which can be changed by rotating the speed control
switch. The numbers 0, 1, 2 and 3: 0 = OFF, 1 = Slow, 2 = Medium, 3 = Fast speeds.
5. For fixed air flow ensure the swing arm is not connected to the fan motor.
6. For oscillating air flow ensure the swing arm is connected to the fan motor by
rotating the oscillating adjustment screw in an anti-clockwise direction.
Operating Instructions
Environment of Use
1. The max relative humidity is 90% (when in 25°C).
2. Below 1000 metres altitude.
Maintenance
1. To ensure prolonged safe use ensure you have this unit inspected, cleaned &
moving parts lubricated by a qualified person after every 1000 hours of use.
2. Regularly inspect the cord & plug & do not use if damaged. A license electrician
is required to repair or replace the cord & plug.
3. Any other repairs or maintenance must be performed by a qualified person.
4. ASSEMBLING & OPERATING INSTRUCTIONS