5. CLEANING, MAINTENANCE & STORAGE
MAINTENANCE
Attention! Maintaining your heater regularly and carefully according
to our guidelines is crucial if you want to ensure its long and reliable
service life. Make sure the Reflector and IR-Filament are cleaned at least
once a month. Observe upkeep and cleaning procedures whenever
required. Due to the high levels of dust in the air, it is possible that the
frequency of inspections will need to be increased. While cleaning
the device, visually inspect the Reflector, Wire, and Frame for signs of
deformation.
In the event of distortion, contact customer care for assistance. When
you’re cleaning the device, give the power cord and plug a quick
visual inspection. Get in touch with your technical support team if you
notice any deformation.
CLEANING
Frequent and meticulous cleaning keeps your infrared heater running
smoothly for many years. Follow the procedures below to clean your
heater:
1. To ensure your safety, unplug the power cord before cleaning your
appliance.
2. Before proceeding, ensure that the heater is completely cool.
3. To maintain the heater clean, use a soft, wet cloth to clean the
outer shell. If necessary, use a mild detergent. After cleaning, use a soft
cloth to dry the unit. (WARNING: DO NOT ALLOW LIQUIDS TO ENTER THE
HEATER).
4. DO NOT clean the heater with alcohol, gasoline, abrasive powders,
furniture polish, or rough brushes. This may cause damage or
deterioration to the heater’s surface.
5. DO NOT put the heater in water.
6. Do not use the heater until it is entirely dry. While not in use, keep the
heater in a cool, dry place to avoid dust and grime build up. To store,
use a packaging carton.
Summary of Contents for CF2000
Page 4: ......
