Assembling Fan With the Light Kit (continued)
13
Figure 26
5.
Install included minican bulbs into each of the two
sockets. (Figure 25)
6.
Disassemble the finial, trim cover and nut. Then
secure glass bowl to light fitter using supplied nut.
e ins all ri cover ollo ed y e finial.
Do not over tighten. (Figure 26)
CAUTION
To reduce the risk of fire, use 75-watt max. type
T4-minican JD E11 tungsten halogen bulb. Turn off
the wall switch and allow the bulb to cool for 10
minutes before relamping.
Bulb is pressurized and may shatter. DO NOT
TOUCH BULB WITH BARE HANDS. Fingerprints
may result in shorter bulb life. Remove fingerprints
with alcohol prior to use.
Figure 25