14
Figure 1
Glass
Housing
Assembly
1.
Secure the glass to housing assembly by twisting
in a clockwise direction. Twist the glass gradually
until it snaps onto the housing assembly
.
Do not over-tighten. (Figure 1)
Ceiling Canopy
Canopy Screw
Cover
Figure 1
NOTE:
This step is applicable after the necessary
wiring is completed.
1.
Assemble canopy by rotating key slot in canopy
over shoulder screw in hanger bracket, taking care
not to pinch the wires. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that
was previously removed. (Figure 1)
2.
Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket
utilizing the key slot twist-lock feature. (Figure 2)
Figure 2
How to Install Your Canopy Housing
How to Install Your Glass
Shoulder Screw
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and
the ceiling.