How to Install Your Canopy Housing
2.
Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket utilizing
the keyslot twist-lock feature. (Figure 2)
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
Canopy Screw
Cover
Figure 2
Ceiling Canopy
Figure 1
1.
Assemble canopy by rotating key slot in canopy over
shoulder screw in hanger bracket
and care not to pinch
the wires.
Tighten shoulder screw. Fully assemble and
tighten second shoulder screw that was previously
removed. (Figure 1)
12
How to Assemble Your Ceiling Fan Blades
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled
may result in damage to the fan blades.
CAUTION
NOTE:
Periodically check blade holder hardware and
resecure if necessary.
2.
Secure the blade holders to the hub of motor
To reduce the risk of personal injury, do not bend the
blade holders when installing, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between the rotating blades.
WARNING
!
To reduce the risk of electric shock, disconnect the
electrical supply circult to the fan before installing
light kit.
CAUTION
x 27
3/16
˝
-24
Serrated Head
Screw
HARDWARE USED:
3/16
˝
-24 Serrated Head
Screw (3 each per blade)
Blade
Blade Cover
Blade Holder
Figure 1
1.
Lay the blade holders with the threaded posts and
pitched foot facing up. Position the blades over the
blade holders with the threaded posts showing. Make
sure the bottom edge of the blades is fully seated
against the blade holders. Place blade covers on top
of the blades, positioning the holes over the threaded
posts. Tighten serrated head screws to secure the
blades to the blade holders. (Figure 1)
HARDWARE USED:
x 27
1/4˝-20
Pan Head
Screw
Figure 2
1/4˝-20
Pan Head Screw
(3 per assembly)
NOTE:
This step is applicable
after
the necessary wiring
is completed.
