8
How to Assemble
Your Ceiling Fan Blades (continued)
Figure 5
5.
Re-assemble the upper housing cover and motor
coupler washer as shown. (Figure 5)
6.
Securely tighten the six screws that were previously
removed in Step 2 on the motor assembly.
(Figure 6)
Motor Coupler
Washer
Figure 6
Figure 1
Figure 2
Upper Housing
Cover
How to Assemble Your Ceiling Fan
Downrod
Set Screw
Pin
Hanger Ball
1
.
Remove the hanger ball
portion
from the downrod/
hanger ball assembly by loosening the set screw in the
hanger ball until the ball falls freely down the downrod.
Remove the pin from the downrod, then remove the
hanger ball. Retain the pin and hanger ball for reinstal-
lation in Step 6. (Figure 1)
2.
Remove the hairpin clip and clevis pin from the
bottom of the downrod. Retain the pin and clip for
reinstallation in Step 4. (Figure 2)
Hairpin Clip
Clevis Pin
