Hardware bags
Carton
Lower Inner
Packaging
Upper Inner
Packaging
Wall
Brack et
WARNING
Do not install or use fan if any part is damaged or
missing. Contact your retail store for miss ing or
damaged parts.
1. Check to see that you have received the fol low ing
parts:
•
•
1. 5/16 -18 x 2
½
Bolt
2. 5/16 Flat Washers (3)
3. Special Hex Bolt
4. 5/16 -18 x 1
½
Bolt (for use with Pedestal Acc.)
•
1. Two #12 x 3 wood screws.
2. Two 5/16” plastic hole caps.
3. Two
½
plastic hole caps.
NOTE:
If you are uncertain of part de scrip tion, refer to
exploded view illustration. (page 20)
NOTE:
Place the parts from the Hardware Bag in a
small container to keep them from getting lost. If any
parts are missing, contact your local retailer.
How to Assemble Your Wall Accessory
Tool Needed for Assembly
•
½
Adjustable Wrench
Unpacking Instructions for the Wall Accessory
Fig. 22
12
WARNING
This product is designed to use only those parts
supplied with this product and/or any ac ces so ries
designated spe cif i cal ly for use with this product by
Fanimation. Sub sti tu tion of parts or accessories not
designated for use with this product by Fanimation
could result in personal injury or property damage.
