Maintenance
How to Clean Your Ceiling Fan Blades
1.
y
l
n
o
e
h
t
s
i
n
a
f
g
n
il
i
e
c
w
e
n
r
u
o
y
f
o
g
n
i
n
a
e
l
c
c
i
d
o
i
r
e
P
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth
.
h
s
i
n
i
f
e
h
t
g
n
i
h
c
t
a
r
c
s
d
i
o
v
a
o
t
Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish.
Periodic light dusting of the blades is recommended.
A feather duster will work best.
Avoid using water, cleansers, or harsh rags, which can
warp and ruin the blades.
CAUTION
Do not use solvents when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
RECOMENDED:
Periodically check that the blade holders to motor hub screws are secure and tight.
14
How to Operate Your Ceiling Fan (continued)
Figure 5
Figure 6
5.
The remote buttons instruct as below: (Figure 5)
I = minimum speed II = low speed
III = medium low speed IV = medium speed
V = medium high speed VI = high speed
: Turns the fan off.
: Controls fan direction - forward and reverse.
: Controls light-Infinite light levels are available by
holding the light on/off button.
Fan speed:
6.
“D” and “ON” dip switch:
For this fan, switch should be in the "ON" position, allowing
for dimming of the light. (Figure 6)
The receiver provides the following protective function:
Lock position: The DC motor has a built-in safety feature
against blade obstruction during operation. If something
obstructs the fan blades the motor will stop operating after
30 seconds of interruption. Please remove obstacles and
reset.
Over 80W protection: When the receiver detects motor
power consumption which is greater than 80W, the
receiver power will shutdown and fan operation will cease.
Disconnect the power supply and after 5 seconds return-
power on to the fan. (Figure 6)