Figure 1
Floor
No
less than
7 ft
7
▲
WARNING
Failure to seat tab in groove could cause damage to
electrical wires and possible shock or fire hazard.
▲
WARNING
To avoid possible shock, do not pinch wires between the
downrod/hanger ball assembly and the hanger bracket.
Final Fan Assembly
1.
Make sure the electrical supply wires, including the
hanger bracket grounding wire and safety cable are pulled
through the extension pole, between the hanger bracket
and the junction box so that electrical connections can be
made later.
2.
Carefully lift the fan and seat the downrod/hanger ball
assembly on the hanger bracket that was just attached to
the ceiling joist. Be sure the groove in the ball is lined up
with tab on the hanger bracket. (Figure 2)
CAUTION
The fan must be hung with at least 7´ of clearance from
floor to blades (Figure 1)
Figure 2
Downrod/Hanger
Ball Assembly
Tab
