10
Installing the Lower Housing Assembly (cont’d)
Figure 4
Figure 5
Figure 6
4.
Securely attach Downlight Socket Plate Assembly to
the Adapter Plate by tightening four screws with spring
washers (
5
/
32
-32 x
8 mm) provided with the fan.
(Figure 4)
5.
Install three Candelabra Bulbs (not included - 40 watts
max) in each of the sockets on the Downlight Socket Plate
Assembly. (Figure 5)
6.
Securely attach Lower Glass by tightening hex nut and
Finial Nut supplied with the fan. Don’t overtighten. (Figure
6)
7.
You have now completed the assembly of your ceiling
fan. Restore electrical power.
INSTALLATION NOTE
Be sure to line up the curved slotted holes located on
both Lower Housing Support Plates. (Figures 4 & 5)
Purpose of these holes are for the convience of removing
and re-installing the blades without dis-assembling the
Adapter Plate and Downlight Socket Plate Assembly.
IMPORTANT
40 watt bulbs are the maximum wattage allowed to safely
operate the fan.
Summary of Contents for Draco FP3220 Series
Page 15: ......
