Fanimation BECKWITH FP7964BN, Installation Instructions Manual

Page: 12 / 38

12
How to Operate Your Ceiling Fan
2. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 2)
4. The 5-button hand-held remote transmitter includes
buttons for high, medium and low fan speeds as
well as fan off and light on/off. (Figure 4)
5. If airflow is desired in the opposite direction, turn
the fan off and wait for the blades to stop turning.
Slide the reverse switch on top of motor assembly
to the opposite position and turn fan on again. (Figure 5)
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until the blades are in place. Noise and
fan damage could result.
WARNING
Reverse Switch Information
Season Rotation Direction Switch Position
Summer Counter-Clockwise
Left
Winter Clockwise
Right
MAIN FUSE BOX
Figure 2
Figure 1
Figure 3
REMOTE
3V, CR2032
BATTERY
2 PCS
CONTROL
Figure 4
5-BUTTON
REMOTE
CONTROL
Reverse
Switch
Figure 5
3.
To make fan operational, install two 3-volt batteries
(included) in the hand-held remote transmitter. If not
using for long periods of time, remove battery to prevent
damage to transmitter. Store the remote away from
excessive heat or humidity. (Figure 3)
For illustrative purposes only -not
intended to cover all types of controls
1.
IMPORTANT:
Using a full range dimmer switch
(not included) to control fan speed will damage the fan.
To reduce the risk of fire or electrical shock, do not use
a full range dimmer switch to control the fan speed.
(Figure 1)
Do not operate this fan with a variable (Rheostat) wall
controller or dimmer switch. Doing so could result in
damage to the ceiling fan's remote control unit.
WARNING