26
4/ INSTALL THE LED LIGHT KIT
Connect the LED connector of the ceiling fan to the one of the light kit, place the light kit on the motor block
then fix it using the 3 screws.
Carefully install the supplied LED light dome by turning it clockwise until it locks in place.
3/ INSTALL THE BLADES
Install the blades supports on the motor block by using the screws provided.
Once the supports are installed, position each blade on its support then fix it by using the screws and washers
provided. Caution, tighten the screws carefully to avoid damaging the blades, but be sure to tighten properly
to prevent excessive vibration during start-up.
