-3-
A
Photography lights will be installed in the camera or
photographic camera lights before removed, is required to set
the power switch in OFF.
Photography lights installed
1. Rotating photographic lights, make it with the consistent direction of the camera lens
2. Photography lights interface will be inserted into the interface of the camera
concave-shaped
3. Clockwise rotating locking until locked in place
Photographic lights removed
The opposite direction along the arrow anti-clockwise rotating locking to Release it
The opposite direction along pull out the photographic light, removed it
The use for photographic light
1. Shown to promote the battery in
accordance with the arrow to open the
battery cover warehouse.
2. Marked by positive and negative people
loaded batteries (not installed anti).
3. Clockwise to open the power and adjust
the illumination required.
4. According to filming luminous efficiency
need to select color temperature, Without
the filter Color temperature is 5600K for
daylight. Use the Amber film the
luminous efficiency color temperature
is 3000K.
5. Want Soft, you can use the equipment
soft-film. soft-film can also working with
the Amber film in the same time.
6. Insert the soft film in the slot, can be
strengthened the light source diffusion of
soften extent.
B
Open the battery cover, remove the AA batteries.
Insert the power plug 5-12V into the DC jack.
Note: the power po -
A
B
C
Insert the external power supply
