1. Make sure the light bulb have been
adequately cooled to touch, turn on the
screws at the bottom of the light front cover,
removed the front cover,
2. Replacement bulbs
①
To replace old light bulbs, use the new
bulbs casing to masked the old light bulb,
then use the casing and pull it out.
②
Straight insert the new bulb into the socket
* Can not be tilted the light bulbs
3. Put on the front cover, install it, and tightened
the screw.
Just bright up, the light bulb will become too
hot. Please wait until the bulb cooling down
to deal it.
In order to avoid leaving fingerprints on the
bulb, use a dry cloth to holding it. If the bulb
is dirty, please clean it completely
Just bright up, the light bulb will become too
hot. Please wait until the bulb cooling down
to replace it.
Note
1
3
2
5
3
4
A
B
C
Reflector
Barn doors bracket
