background image

- 2 -

»

Automatic lock of the system power supply for 10 minutes in 

the case in case the power was exceeded fivefold;

»

Automatic power-off when the power consumption is 8 times 

higher than the set threshold value;

»

Automatic power-off when  the power consumption is great-

er than 16 kW;

»

Adjustable tripping time (1 s÷3 min.);

»

Adjustable reconnection time (4 s÷6 min.);

»

LED display for indicating power consumption and device 

configuration,

Power P

The power limiter allows you to power the circuit when the total 

power of the receivers in the controlled circuit is lower than the 

one set on the limiter scale. Exceeding the set power consump-

tion threshold in a controlled circuit results in a disconnection of 

the power supply to this circuit after a user-set time. The power 

supply will be restored automatically after a preset time. If the 

power consumed is still greater than the set value, the circuit will 

be disconnected again.

Automatic disconnection will also occur if the power consump-

tion is 8 times higher than the set threshold and if the power 

consumption exceeds 16 kW. The limiter is locked for 30 seconds.

Voltage UL/UH

This function controls the number of consecutive actuations of 

the limiter. When the preset counter value is reached, the limit-

er disconnects the power supply permanently (no automatic re-

turn). The system can be switched on again after a manual reset 

of the lock. By default (parameter 0) the limiter has the lockout 

function set to 10 minutes after 5  consecutive disconnections.

Functioning

Summary of Contents for OM-633









Reviews: