- 3 -
The FW-WSO4 button can be glued directly to a wall or other surface using double-si-
ded adhesive tape or fixed to a standard ø60 mm installation box.
Mounting in the installation box:
Remove the button key by gently lifting the lower or upper edge of the button
with a flat tool.
Unscrew the marked screws.
Disconnect the button stand from the frame and electronics.
Screw the stand to the installation box.
Assemble the button by following the disassembly steps in the reverse order.
Before first use, remove the foil liner protecting the button against acciden-
tal discharging of the battery.
Mounting
Summary of Contents for FW-WSO4
Page 8: ......
