F&F FW-WSO2, Manual, Page: 3 / 8

- 3 -
Before first use, remove the foil liner protecting the button against ac-
cidental discharging of the battery.
Mounting
The FW-WSO2 button can be glued directly to a wall or other surface using double-si-
ded adhesive tape or fixed to a standard ø60 mm installation box.
Mounting in the installation box:
Remove the button key by gently lifting the lower or upper edge of the button
with a flat tool.
Unscrew the marked screws.
①
②
Disconnect the button stand from the frame and electronics.
③
Screw the stand to the installation box.
④
Assemble the button by following the disassembly steps in the reverse order.
⑤