- 9 -
Too high temperature can be caused by connecting a too
high load to the sensor.
The brightness level of the signal LED adjusts to the am-
bient brightness (high ambient brightness – high LED bri-
ghtness level). When an overtemperature is indicated,
the light flashes at maximum brightness.
power supply
165÷265 V AC
maximum load current
8 A
detection range (adjustable)
0.1÷2.0 m
brightness level (adjustable)
2÷500 lx
switch-on time (adjustable)
0÷10 min.
detection
sensor
ToF laser sensor
wave length
940 nm
security 1
st
class
beam scattering
±18°
power consumption
standby
0,5 W
on (relay on)
1 W
terminal
2.5 mm² screw terminals
tightening torque
0.4 Nm
working temperature
-10÷45°C
continued on next page
Technical data
Summary of Contents for DRL-60-230
Page 11: ......
