- 8 -
DMM-5T-3 User manual
No.
Screen
Description
Fig. 14.
Shows the average (Ave) values of the phase-phase voltage.
When you press right button, the Figure-15 appears on the screen.
Fig. 15.
Illustrates the date and time, in which phase-phase voltage goes under 90%
(<Vtr×230×0.9) of the nominal voltage values (lowest). When you press the ri-
ght button, values belong to L23 and L31 phases appear on the screen respecti-
vely. When you press right button, the Figure-16 appears on the screen.
Fig. 16.
Illustrates the date and time, in which phase-phase voltage goes above 110%
(<Vtr×230×1.1) of the nominal voltage values (swl). When you press the right
button, values belong to L23 and L31 phases appear on the screen respectively.
When you press right button, the Figure-17 appears on the screen.
Fig. 17.
Illustrates the recorded date and time, in which phase-phase voltage goes un-
der 40% (as a default) (<Vtr×230×0.4) of the nominal voltage values (cut), and
a blackout occurs. When you press the right button, values belong to L23 and
L31 phases appear on the screen respectively.
When you press right button, the Figure-18 appears on the screen.
Fig. 18.
It shows current values of each phase.
When you press the right key, the Figure-19 comes to the screen.
Fig. 19.
It shows the minimum (Min) current values of each phase.
When you press the right key, the Figure-20 comes to the screen.
Fig. 20.
It shows the maximum (Max) current values of each phase.
When you press the right key, the Figure-21 comes to the screen.
Fig. 21.
It shows the average (Ave) current values of each phase.
When you press the right key, the Figure-22 comes to the screen.
Fig. 22.
It shows current demand (Dmd) values for each fuse.
When you press the right key, the Figure-23 comes to the screen.
Fig. 23.
It shows the time and date of demands which belongs to each phase.
When you press the right key ,values which belongs to the L2 and L3 comes to
the screen subsequently.
When you press the right key, the Figure-24 comes to the screen.
Fig. 24.
It shows the time and date which current limit (>Ctr×0.80) of each phase is
exceeded. When you press the right key ,values which belongs to the L2 and L3
comes to the screen subsequently.
When you press the right key, the Figure-25 comes to the screen.
Summary of Contents for DMM-5T-3
Page 24: ......
