Section 1: Tumbler Base Assembly
With larger screws attach wide back board
and narrower front board to side pieces
(open squares). See photo 1-1 for visual
help.
IF OPTIONAL LEG ASSEMBLY WAS PURCHASED PLEASE SKIP TO
SECTION 5 AND THEN COME BACK TO SECTION 2 TO COMPLETE
ASSEMBLY OF TUMBLER.
Section 2: Motor Assembly
Install motor assembly (already mounted
on face plate) into the frame using the
smaller screws
(photo 2-1)
Wrap excess motor cord around motor and
fasten power adapter in the velcro strip on
the wide back board.
(photo 2-2)
**If you did not purchase the leg assembly
you may wish to drill a “mouse hole” at the
base of the back board to allow the power
cord to feed through.
