Fancom IVM-TOUCH, Manual

Page: 7 / 30

G
4
g
Install the IVM-Touch and associated components as follows:
1. Determine the location of the IVM-Touch
2. Mount the IVM-Touch
3. Connect the IVM-Touch
4. Configure the IVM-Touch
5. Test the IVM-Touch
Takes into account the following guidelines:
Never place the IVM-Touch in a place where the weather has direct influence (not in the sun, not in
places where the temperature can rise sharply etc.).
Never mount the IVM-Touch near water pipes, drainage pipes etc.
Never mount the IVM-Touch in a humid and/or dusty room and certainly not in the room where the
animals are present.
Mount the IVM-Touch at such a height that you can control the IVM-Touch easily (eye level) and square
on a solid backing. The cable glands and wiring should be positioned at the bottom.
Mount the IVM-Touch as follows:
1. Mark the screw holes by using the drilling template (taking into account the required edge distances).
2. Open the cover and fasten the control computer in the mounting holes on the corners.