Gnd
9
g
4.
Adjusting the iM.60
For safe and proper functioning of the iM.60, the iM.60 must be adjusted:
1. Adjusting the limiting switches (mechanical adjustment)
2. Closed position and the potentiometer that measures the position of the intake valve
3. Open position
4. Predefined position (optional)
5. Completing adjustments
Display
After turning the iM.60 on, three characters are first displayed in sequence. These comprise the software version
number (one character per second). During adjustment, indications appear on the display. In
manual mode
, the
meanings of the indications are:
Display
indication
Meaning
1.
Adjustment closed (minimum air inlet position).
2.
Adjustment open (maximum air inlet position).
3.
Adjustment of the predefined air inlet position.
C.
Adjustment of the minimum air inlet position accomplished. (closed)
O.
Adjustment of the maximum air inlet position accomplished. (open)
P.
Adjustment of the predefined air inlet position accomplished.
F.
Adjust: too small difference on the control entrance between closed and open adjustment.
E.
Error during the determination of the position within the adjustment procedure. (error)
