27
Fancom 771
INSTALLER: 5. Installer settings
21
Select option 3-3 Direct relay control. The following will appear on the display:
This menu enables a relay to be switched ON and OFF. This is done as follows:
• Set Panel to 0 and Slot to 1. These are fixed values for our application.
• Set Satellite to a value between 1 and 30, depending on the IRM.16 to be activated (similar to the
address set with jumpers on the IRM.16).
• Set Relay to a value between 1 and 16, depending on the relay to be controlled.
• Set Value to 1, if above is to be used. Otherwise set Value to 0.
Select option 3-4 IO-cards present. The following will appear on the display:
This option can be used to check if the computer recognizes the IO-cards present.
The IMC753 DIGITAL IN must be entered at one of these slots.
5.3.3 INSTALLATION option 3-3 Direct relay control
>>Direct relay control
Panel 0 Slot 0
Satellite 0
Relay 0
Value 0
21
1x
2x
1x
2x
5.3.4 INSTALLATION option 3-4 IO-cards present
>> IO-cards present
Card in slot 1 #
Card in slot 2 -----------------
Card in slot 3 -----------------
Card in slot 4 -----------------
Card in slot 5
IMC753 DIGITAL IN
Card in slot 6
-----------------
Card in slot 7
-----------------
Card in slot 8
-----------------
21
1x
3x
1x
2x
☞
