manualshive.com logo in svg

Fancom 750, User Manual, Page: 16 / 61

Share
Download
Fancom 750 User Manual Download Page 16

Lumina 750

 Basic working principles

 

2.6.2

SUB-PHASE: Disinfection

Aim

Killing flies and/or larvas during spawn run.

Uses

●

fan

●

a fresh air inlet which automatically closes to keep the pesticide in the tunnel

Important

The disinfection sub-phase can be used only during the spawn run 1 and 2. This sub-phase can

be started/stopped by pressing the disinfecting button. The disinfection button is an external

button placed outside of the controller. The subphase can also be started by entering the
required sub-phase at 

1

 

Overview

 - 

Sub-phase

.

 

2.6.3

SUB-PHASE: Filling

Aim

Filling the tunnel for a new round.

Uses

●

fan

●

fresh air

Important

The filling sub-phase can be used only during the empty phase. This sub-phase can be started/

stopped by pressing the external placed button. The disinfection button is an external button

placed outside of the controller. The subphase can also be started by entering the required sub-
phase at 

1

 

Overview

 - 

Sub-phase

.

 

2.6.4

SUB-PHASE: Empty

Aim

A transitional phase between the emptying and filling of a tunnel. This phase also prevents frost

damage to buildings and equipment.

Uses

Frost protection.

Method

-

 

13

Summary of Contents for 750






























































Reviews:

No comments