FAN INSTALLATION INSTRUCTIONS
6
Rev 6.0
Fanco Infinity DC. All Rights Reserved.
•
Make sure electricity is turned off at the main power box before commencing work. Turn off the
power by removing fuse or turning off circuit breaker before installing the fan and replacing the
lamp.
•
The lowest point on the fan blade must be at least 2.1 metres (7 feet) from the floor.
•
Make sure that ceiling joists are strong enough and of adequate size to support the weight of the
fan of about 35 kg.
INSTALLING THE FAN
1.
Fan and hanger bracket must be
earthed during installation.
Secure the hanger bracket to the
ceiling joist or suitable piece of
timber inserted between the
ceiling joists. The bracket should
be attached with two timber
screws and washers supplied.
2.
Align blade holes with holes at
the bottom of the motor
assembly. Hold blade into
position, then insert the blade
buckle and screws in position.
Tighten the screws. Repeat the
same step until all blades are
installed.
Caution
:
Do not over-tighten the screws.
Tips:
Life up the yoke cover for easier
blade installation.
