Fanco Eco Silent Deluxe DC, Installation Manual

Page: 13 / 16

12
b. Please check if there are any other similarly remote controlled objects that work nearby, as
remote controlled items operating on the same frequency may disturb each other.
2. If the battery is low it will affect the sensitivity of the remote control and the signal reception
and must be replaced (the LED indicator light will flash a warning when the battery runs low).
3. Please remove the battery if the remote control is not being used for a long time.
4. If multiple fans are installed near the fan to be paired, power to the other fans should be
turned off before pairing.
Considerations when installing multiple ceiling fans:
Sometimes you may encounter a remote control issue when installing multiple fans. For the
purposes of this troubleshooting guide:
Fan A uses Remote control A and Receiver A, while Fan B uses Remote control B and Receiver
B.
1. Isolate power to one fan only when pairing the remote
When installing two or more fans, you should manually isolate power to Fan B while
completing the pairing process on Fan A. If power is not isolated to one of the fans when the
power is restored at the fuse box, then both receivers will be put into “learning mode” such
that when you try to pair Remote control A to Receiver A, Receiver B will also be in learning
mode and might pair to Remote control A too.
FUNCTIONS OF THE TRANSMITTER
F/R
P airing: pres s “ ” after power s upply, s hort pres s 3 times and hold at leas t
3S at 4th pres s , a "beep" s ound mean pairing s ucces s (All procedure need to
be finis hed within 1 0)
F an s peed
regulator
FA N ON/OF F
Timer
(1 H-9H)
F /R
(hold for 3S )
Natural Wind
L amp ON/OF F
L ight dimmer
(1 -8level luminance)
Tri -color
convers ion